Black-Iron Patch

sprinkler pipe patch

Pre-cut to fit standard sprinkler pipes.

Description

Black-Iron Patch easily installs using standard drywall compounds and corrects cutouts that were made too large. Black-Iron Patch will not fuzz-up during sanding.

  • Pre-cut to fit standard sprinkler pipes
  • Repairs and reinforces mis-cut or damaged areas around sprinkler pipe holes
  • Install in areas where patching cutouts were made too large
  • Sprinkler pipe relocation

 

Installation

Installation

  • To apply, lightly sand area to be repaired.
  • Apply drywall compound 1/8”-1/4” thick directly to back of patch.
  • Place patch over center of repair and wipe down flat to wall using joint knife.
  • Immediately skim-coat patch and let dry.
  • Apply second coat, let dry, and sand. Compound that remains on backside of Black-Iron Patch makes patch very rigid in the damaged area.
Resources

Storage:

All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from weather and moisture.

Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet

Product Code Description
BP-100, BP-500 Black-Iron Patch

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System