Innovative Stucco Reinforcing Products
from Structa Wire Corp
Welded Wire Stucco Reinforcing Products for 3 Coat & 1 Coat Stucco
- From the inside out, we make stucco beautiful.
- We provide engineered, tested and approved solutions for stucco walls, ceilings and corners.
- Our products employ the patented use of ‘cold rolled’ or flat wires to increase strength and structural performance.
- We give design consideration to every detail to ensure worker friendliness & construction site efficiency.
- Technical and engineering support provided.
- Meets IAPMO ER 2017 in compliance with the 2012 International Building Code® (IBC)
April 1, 2015 - Article
Plenty of metal plaster base options are on the market, be it diamond mesh, woven wire or welded wire lath. But, which is best?
Structa Wire Corporation of Vancouver, BC and Master Wall Inc.® of Fortson, GA have entered into an agreement for joint marketing and warranting of certain Structalath and Mega Lath products with the Cemplaster Fiberstucco system. Find out more here.
To find out more about Structa Wire, watch the video below:
STRUCTALATH III (Stucco Reinforcing)
No. 17 1- 1/2" x 1-1/2" - For residential/wood frame construction
Structalath II is a welded wire lath engineered to enhance the performance of stucco cladding. Structalath reduces cracking and increases stucco embedment while providing worker friendly benefits. A reduced furr depth of 3/16″ version is now available for use in One Coat systems and 1/2” applications.
|STRUCTALATH III 38-3/8"||150 ft. long||53 sq. yds||54 lb/roll||32/pallet|
TWIN TRAC (Superior Stucco Reinforcing)
No. 17 1- 1/2" x 1-1/2" - Alternative to 2.5 diamond metal lath
Structalath Twin Trac is an innovative self furring reinforcing lath that simplifies the attachment of lath to wood and steel studs. It is excellent for commercial construction; Twin Trac has all the great features of regular Structalath with the addition of eight secondary cold-rolled longitudinal wires that add strength to form a 'track' for convenient attachment. Twin Trac can be substituted wherever 2.5 metal lath has been specified. Also available in Stainless Steel.
A reduced furr depth of 3/16″ version is now available for use in One Coat systems and 1/2” applications.
|TWIN TRAC 38-3/8"||150 ft. long||50 sq. yds||60 lb/roll||32/pallet|
Submittal Sheets for Twin Trac 316 (Reduced furring to 3/16” for 1/2” stucco or 1-coat stucco)
MEGA LATH (Heavy Duty Reinforcing)
No. 17 3/4" x 1-1/2" - Alternative to 3.4 diamond metal lath
Mega lath is self furring welded wire providing heavy-duty reinforcing for both stucco and stone installation. Mega Lath is an engineered product that provides easy attachment for both wood and steel construction. Specifically designed for stucco applications that require extra reinforcing, Mega Lath can be used as alternative to 3.4 lb/yd2 diamond mesh metal lath specified in ASTM C 847 and at 1.95 lb/yd2 Mega Lath can be installed 24"o.c. over open framing. Mega Lath is recommended wherever 2.5 or 3.4 metal sheet lath is specified.
|MEGA LATH 30"||108 ft. long||30 sq. yds||57 lb/roll||48/pallet|
V TRUSS (Walls & Ceiling Reinforcing)
No. 17 3/4" x 1-1/2" - Alternative to 3.4 metal rib lath
V Truss for Walls & Ceilings or Structa Rib Lath was designed to improve the performance of stucco on overhead surfaces. V Truss for Walls & Ceilings is a self furring welded wire lath for use as an alternative to 3.4 lb rib metal lath. This product is also approved for use on vertical surfaces and as a reinforcing component for rainscreen wall systems.
|V TRUSS WALLS & CEILING||98" x 28" sheet||2.1 sq. yds||4.5 lb/sheet||
V TRUSS CORNER (Corner Reinforcing)
Straight & Bullnose
Structa V Truss, in addition to providing corner reinforcement, provides strength, ease of installation and increased embedment. V Truss is the result or our continued commitment to providing the best lathing products possible.
|V TRUSS CORNER||10 ft lengths||40/carton||50 cartons/pallet|