EIFS Control Joint w/Removable Tape

Designed to relieve stress caused by expansion and contraction in EIFS applications

Also controls cracking in large areas of walls and ceilings. The removable tape creates a mask over the expansion slot during installation for a clean finish.

Found In:
Exterior Finishing > Control Joints
Application(s): EIFS
Description

Control joint used for EIFS applications to relieve stress caused by expansion and contraction and control cracking in large areas of walls and ceilings. The removable tape creates a mask over the expansion slot during installation for a clean finish

Large perforations allow the base coat mixture to easily flow through and bond to the substrate. Recommended usage is for every 130-140 sq. ft. with no one side being longer than 15ft. Caulk all intersections, butt joints, ends, and corners at the time of installation.

Product Data & Ordering Information

Product code Finish thickness Insulation thickness Perforated flanges "V" Reveal Pcs./Box
CJV-16E 1/16" All 1-1/8" 3/16" 60

 

 

 

Tools: Code & SDS Architectural Specs AIA / CEU
Resources

Catalog

ASTM & Code Standards

Product Specifications

  • ASTM E2568 - Standard Specification for PB Exterior Insulation and Finish Systems
  • ASTM D1784 - Standard Specification for Rigid Poly Vinyl Chloride (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds
  • ASTM D4216 (Cell class 13244C) - Standard Specification for Rigid Poly Vinyl Chloride (PVC) Compounds and Related PVC and Chlorinated Poly Vinyl Chloride (CPVC) Building Products Compounds
  • ASTM D638 - Standard Test Methods for Tensile Properties of Plastics
  • ASTM D790 - Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
  • ASTM D256 - Standard Test Methods for Determing the Izod Pedulum Impact Resistance of Plastics
  • ASTM D648 - Standard Test Methods for Deflection Tempurature of Plastics Under Flexural Load in the Edgewise Position
  • ASTM D696 - Standard Test Methods for Coefficient of Linear Thermal Expansion of Plastics Between -30 Degrees Celsius and 30 Degrees Celsius Vitreous Silicia Dilatometer
  • SDS & Product Certification Information

Installation Standards

  • ASTM E2110 - Standard Terminology for Exterior Insulation & Finish Systems (EIFS)
  • ASTM E2486 - Standard Test Methods for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)
  • ASTM E2273 - Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
  • ASTM E2511 - Standard Guide for Detailing of EIFS-Clad Barrier and Drainage Wall Assemblies
Submittals

Product Submittal Sheets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
CJV-16E EIFS Control Joint with Removable Tape

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.