Extra rigid vinyl bullnose corner bead designed for stiffness and strength.
PRO-Bull 3/4" Cornerbead
PRO-Bull 3/4" Cornerbead
Used to create elegant, contemporary, rounded 90° drywall corners
PRO-Bull 3/4" radius bullnose provides soft, rounded aesthetic to outside corners.
When installing the drywall, use the minimum drywall setback on the PRO-Bull ¾” Corner Bead to ensure the proper fit and achieve maximum adhesion. Avoid using the tapered edge of the drywall board on outside corners. Make sure the surfaces of corner are clean and smooth. Measure and cut the PRO-Bull ¾” Corner Bead to length, subtract ½” on vertical applications. Dry fit the corner bead to ensure the optimum fit.
For optimal results spray the drywall surface and the flanges of the PRO-Bull ¾” Corner Bead with spray adhesive and position the corner bead into place. Once in position, apply pressure with the handle of your taping knife and then staple the corner bead every 6”– 8” with ½” staples to keep the PRO-Bull ¾” Corner Bead tight to the drywall surface and to ensure a solid bond.
Using an 8” taping knife, apply the first coat of joint compound to the surface of the PRO-Bull ¾” Corner Bead. The use lightweight compound or setting-type compound in this step will reduce shrinkage and speed up the drying time. Let this dry completely, for several hours or overnight.
Using a 10” taping knife, apply the final coat of joint compound. Feather the compound beyond the previous coat. The use of all-purpose compound or topping compound will make for a more durable finish. Let this dry completely, for several hours or overnight.
Lightly sand with 120 grit sandpaper to finish.
ASTM & Code Standards
- ASTM C1047 - Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- ASTM D3678 - Standard Specification for Rigid Poly Vinyl Chloride (PVC) Interior Profile Extrusions
- Installation: ASTM C840 - Standard Specification for Application and Finishing of Gypsum Board
- SDS & Product Certification Information
All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from the weather.
PRoduct submittal SHeets
Click the below Product Code to view Submittal/Tech Datasheet
|PROBULL||PRO-Bull 3/4" Cornerbead|
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittaPro.