Spazzer® Snap-In Grommet (SPGR)

used to secure the Spazzer® bar

The Spazzer® Snap-In Grommet should be used to secure the Spazzer bar when used in load-bearing applications

Description

ClarkDietrich TradeReady® Spazzer® 5400 spacer bar is a pre-notched, 16-gauge, galvanized steel spacer and bridging bar, engineered to facilitate the rapid, efficient erection of exterior curtain wall framing, loadbearing walls and high interior partitions constructed of structural studs.

Alternative Products

Installation

Installation

Load-Bearing Wall

The TradeReady Spazzer 5400 bar is passed through the stud knockouts and rotated 90° into position, engaging each side of the knockout. For load-bearing studs, the Spazzer snap-in grommet requires screws to keep the bar in place. The TradeReady Spazzer 5400 bar should be installed at a maximum 4' o.c. vertically or per  specification, and should not be used in studs over 6" wide.


Non-Load-Bearing Wall

The TradeReady Spazzer 5400 bar is passed through the stud knockouts and rotated 90° into position, engaging each side of the knockout. For 20 gauge studs, the Spazzer snap-in grommet requires screws to keep the bar in place.  The TradeReady Spazzer 5400 bar should be installed at maximum 5' o.c. vertically or per specification, and should not be used in studs over 6" wide.

Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
SPGR Spazzer® Snap-In Grommet

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.