Products


The most rigid of all expanded metal lath products
A High-Rib Metal Lath with a herringbone mesh pattern and seven, 3/8" deep, longitudinal, solid steel ribs at intervals of 3-7/8" across the sheet. These ribs provide the superior strength and exceptional rigidity required when framing is more than 16" on center but does not exceed 24" on center.


Galvanized, Expanded Steel Plaster aND Stucco Base
A superior, multi-purpose expanded steel substrate for Portland cement or widely used for interior and exterior gypsum plaster and stucco & stone reinforcement. Applications include ceilings, soffits, and fascia surfaces, and under ceramic tile in wall, ceiling, and floor applications. Metal lath is useful in general purpose applications and is the best lath available for ornamental work and for flat or contoured surfaces as well as for use as a reinforcing underlay for spray-applied fireproofing.


A Heavy-gauge lath for Enhanced protection from breach
Diamond Security Lath is an expanded steel base used for interior and exterior plaster and stucco reinforcement for secured applications where advanced breech protection is required.


heavy duty Reinforcing
Mega Lath is a self-furring welded wire that provides heavy-duty reinforcing for both stucco and stone installation.


Galvanized Expanded Steel Plaster/Stucco Base
A superior mesh multi-purpose expanded steel base with an approved Grade-D weather resistant barrier attached. Application of asphalt paper-backed (APB) metal lath is used behind stone, traditional stucco, and tile installations as a code compliant weather resistant barrier.


1/4" self-furring, dimpled, Expanded Steel Plaster and Stucco Base
A self-furring expanded dimpled metal lath ideal for interior and exterior use over sheathing, masonry, and other solid surfaces as required per ASTM C847, ASTM C1780, ASTM C1063. The 1/4" dimpled furring allows for more thorough plaster or stucco embedment into and behind the lath for superior mechanical bonding.


1/4" self-furring v-groove Expanded Steel Plaster or Stucco Base
Self-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed “V” ribs, spaced 6" on center along the length of the sheet. The V’s allow thorough embedment into and behind the lath for superior mechanical bonding. A self-furring expanded V-Grooved metal lath, ideal for interior and exterior use over masonry, sheathing, and other solid surfaces as required per ASTM C847, ASTM C1780, ASTM C1063.


more rigid than diamond lath and helps to prevent Plaster loss
3-3/16" wide strips of plain 50lb kraft paper spot attached with glue between the herringbone mesh pattern with seven, 3/8" deep longitudinal solid steel ribs spaced at 3-7/8" intervals across the sheet.


when the ultimate corrosion resistance is required
When the highest levels of corrosion resistance are required, a stainless steel substrate for Portland cement or gypsum plaster used in stucco & stone reinforcement is mandated for interior and exterior installations. Applications include ceilings, soffits, and fascia surfaces, and under ceramic tile in wall, ceiling, and floor applications. Metal lath is useful in general purpose applications and is the best lath available for flat or contoured surfaces and for ornamental work as well as for use as a reinforcing underlay for spray-applied fireproofing.


when the ultimate Self-Furring corrosion resistance is required
Stainless Steel Self-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed "V" ribs, spaced 6" on center along the length of the sheet. The V’s allow thorough embedment into and behind the lath for superior corrosion resistance and through embedment. A self-furring expanded V-Grooved metal lath, ideal for interior and exterior use over masonry, sheathing, and other solid surfaces as required per ASTM C847, ASTM C1780, ASTM C1063.


Reinforcement for corners, windows, doors and openings
Striplath is a flat, expanded metal strip used as plaster reinforcement over joints of solid bases and where dissimilar bases join. It is flexible for use over irregular surfaces.


Stucco Reinforcing
Structa-Wire lath is a welded wire lath, engineered to enhance the performance of stucco cladding and is a part of the ClarkDietrich Easy Embedment System.


Superior Stucco Reinforcing
Structalath Twin Trac is an innovative reinforcing lath that simplifies the attachment of lath to wood and steel studs.


Corner Reinforcing
Innovative Structa V Truss is the result of our continued commitment to providing the best lathing products possible.


wall & ceilings Reinforcing
V Truss for Walls & Ceilings is designed to improve the performance of stucco on overhead surfaces.