Exterior Finishing: Weep & Sill Screeds
1-3/4" Weep Screeds (Perforated Flange)
Designed to direct moisture from stucco and to act as a stop
Install on masonry construction where stucco and foundation walls meet.
1-3/4" Weep Screeds (Unperforated Flange)
Designed to direct moisture from stucco and to act as a stop
Install on frame construction where stucco and foundation walls meet.
2" (Nominal) J-Weep Low-Back
Used as a casing stop bead with stucco, stone and E.I.F.S. Systems
2" Nominal J-Weep Low-Back (2-inch back flange) is commonly used as a straight edge plaster stop at the top of doors and windows over traditional head flashings.
3-1/2" J-Weep High-Back
Used as sill weep screed or at door and window opening
J-Weep High-Back Plaster Stop is a J-shaped, square-nosed trim manufactured from 26-gauge galvanized steel. The 1-3/8" ground is designed for use with 1" of foam, lath, and a one-coat…
3-1/2" Weep Screed with Extended Bottom Leg
Designed to direct moisture from stucco and to act as a stop
Install on frame construction where stucco and foundation walls meet. Includes an extended bottom leg to go under sheathing.
3-1/2" Weep Screeds
Designed to direct moisture from stucco and to act as a stop
Install on frame construction where stucco and foundation walls meet.
Drip Flashing for Rainscreen - DFLRS
Designed to be used at the bottom of entangled mesh rainscreens.
FHA-7 Weep Sill Screed
Exterior foundation WEEP (sill) screed
The FHA-7 is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior concrete foundation, it allows trapped…
Foundation Weep Screed
Moisture removal from stucco
Acts as a stop, and is designed with an unperforated flange to allow moisture removal from stucco installations on frame construction at the foundation line.
Positive Drain Weep Screed