Protects and finishes wallboard edge when gypsum panels abut dissimilar surfaces
L-Trims are used to finish the ends of wallboard where it abuts dissimilar surfaces such as suspended ceilings, beams, plaster, masonry or untrimmed door and window jambs.
Tape-on L-Trims (CDL) are applied in the same manner as all other tape-on beads. Joint compound is used to embed the paper-faced bead to the wallboard paper. Excess compound can be removed with a drywall knife or clean rag.
- Impervious to "scuffing" and "fluffing-up"
- Will not be damaged by sanding
- Substantially reduces joint compound consumption and eliminates one finish coat
- Does not require mechanical fastening (No nails, staples, screws or crimps)
- Superior adhesion, bonding and paintability
- Does not require nose coating
- U.S. Patent Nos. 5,613,335 and 5,836,122
Material: 0.0125 galvanized coating
Product Data & Ordering Information
| Product code | USG Reference | Style | Dimensions | Pcs./Ctn. | ||
|---|---|---|---|---|---|---|
| A | B | C | ||||
| CDL-3/8 | B4 | 3/8" | 3/4" | 1-1/16" | 7/16" | 50 |
| CDL-1/2 | B4 | 1/2" | 3/4" | 15/16" | 9/16" | 50 |
| CDL-5/8 | B4 | 5/8" | 1/2" | 1-1/16" | 11/16" | 50 |
| CDL-3/4 | B4 | 3/4" | 1" | 15/16" | 13/16" | 50 |
| CDL-1 | B4 | 1" | 7/8" | 1-3/16" | 1-1/16" | 50 |
| CDL-1-1/8 | B4 | 1-1/8" | 7/8" | 1-1/16" | 1-3/16" | 50 |
| CDL-1-1/4 | B4 | 1-1/4" | 7/8" | 15/16" | 1-5/16" | 50 |
Standard lengths are 8' and 10'. Other lengths available.
Code Approvals & Performance Standards
- ASTM C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- SDS For ASTM A653 Steel Finishing Products For Interior Finishing and Exterior Finishing
Storage:
All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from the weather.
PRoduct submittal SHeets
Click the below Product Code to view Submittal/Tech Datasheet.
| Product Code | Description |
|---|---|
| CDL | Paper-Faced L-Trim |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.