FHA-7 Weep Sill Screed

Exterior foundation WEEP (sill) screed 

For hard-coat stucco, thin-veneer stone and 1-coat stucco over foam. Installed at the juncture of the sill and the exterior concrete foundation, to allow trapped moisture or water to drain to the exterior of the building. The #7 style screed is manufactured in compliance with ASTM standards and has the minimum requirement of 26 gauge G60 galvanized steel and a 3-1/2” solid nailing flange. Pure zinc alloy (ASTM B-69) is available upon request and priced accordingly.

  • Provides straight edge stops for applied plaster stucco and E.I.F.S.
  • Offers exacting grounds and protective weeps.
  • Meets F.H.A. requirements.
  • Conforms to ASTM C1063.

Product Data & Ordering Information

Product Code Ground Flange Length Pcs./Bdl. Pcs./Pallet
FHA7 1/2", 5/8", 3/4", 7/8", 1-3/8" 3-1/2" 10' 10 500

ASTM & Code Standards:

  • ASTM C1063, CE 240.01 (exterior), ASTM C1780 (thin veneer stone), ASTM C926, UBC, ML/SFA-920, the International Code Council IBC and IRC.
  • All Expanded Metal Lath Accessories are fabricated from prime galvanized steel G60 zinc coating by the hot dipped method, conforming to steel and coating specification ASTM A-653/A-653M or zinc alloy meeting ASTM B-69 as required in ASTM C1063.
  • For installation and placement instructions refer to ASTM C1063, C1780 and C926.
  • SDS & Product Certification Information