Self-Furring V-Groove Lath

1/4" self-furring v-groove Expanded Steel Plaster or Stucco Base

Self-Furring V-Groove Metal Lath is manufactured with five, approximately 1/4" deep, embossed “V” ribs, spaced 6" on center along the length of the sheet. The V’s allow thorough embedment into and behind the lath for superior mechanical bonding. A self-furring expanded V-Grooved metal lath, ideal for interior and exterior use over masonry, sheathing, and other solid surfaces as required per ASTM C847, ASTM C1780, ASTM C1063.

Description

The V-grooved self-furring plaster base is manufactured with evenly spaced indentations, 6" apart which run the length of the lath sheet holding the metal lath a consistent 1/4" away from the surface to be plastered.

The V-groove provides an ideal point of attachment of the fastener to achieve ASTM C1063 compliance. V-grooved metal lath is available with or without a Grade-D asphalt paper-backing, weather resistant barrier.

 

Product Data & Ordering Information

Material: G60 Galvanized Steel
Packaged: 25 bundles or 250 pieces per pallet

Product Code

Wt./Sq. Yd.

 Sheet Size Pcs./Bdl. Yds./Bdl. Yds./Pallet
LAV 2.5 lbs. 27" x 97" 10 20 500
3.4 lbs. 27" x 97" 10 20 500
Tools: Code & SDS Architectural Specs AIA / CEU
Resources

Catalog

 

ASTM & Code Standards:

  • Product specifications
    • ASTM C847 Metal Lath
    • ASTM C841/C1063 Veneer and plaster accessories
    • ASTM C1047 Beads and trims–metal–paper–vinyl
    • ASTM C933 Specification for welded wire lath
  • Material specifications
    • ASTM A1003 (NS33, ST33L, ST33H, ST50L, ST50H)
    • ASTM A653 Zinc-coated hot-dip process
    • ASTM A653/B69 Veneer and plaster accessories/standard spec for zinc strip
  • Protective coating standards
    • ASTM A653  Zinc-coated hot-dip process
    • ASTM C1063 Veneer and plaster accessories
    • ASTM C1047 Beads and trims–metal–paper–vinyl
  • Installation standards
    • ASTM C1063 Installation of metal plaster base systems
    • ASTM C1780 Installation of adhered manufactured stone veneer
  • All ClarkDietrich Expanded Metal Lath is fabricated from prime galvanized steel, G60 zinc coating by the hot dipped method, conforming to Specification ASTM A653/A653M.
  • Intertek CCRR-0204 - Metal Lath - Code Compliance Research Report
    Check the updated list of Certified Production Facilities at Intertek's website at www.intertek.com/building/sfia
  • SDS & Product Certification Information
Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product Code Description
LAV Self-Furring V-Groove Lath (2.5lb and 3.4lb)

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.