Skip to main content

Search

Fast Strut™ (FS12, FS15, FS18, FS20, FS22, FS24)

Used for large standoff conditions

ClarkDietrich Fast Strut™ curtain-wall connector employs the Fast Clip™ technology for curtain-wall stud attachment and is commonly used when large stand-off conditions exist.

Fast Strut™ products are available in standard lengths of 12-1/4" and 15-1/4" and custom lengths of up to 24" long to allow framing attachment well beyond the perimeter of the structural steel or when the spandrel beams are set back from the edge of the structure. Struts are attached to the underside of structural members with screws, welds, or powder-actuated fasteners. Proprietary Deflection Screws are provided with each strut to ensure friction-free sliding. FS12 and FS15 are embossed with fastening patterns to ensure accurate placement of the fasteners.

  • Vertical movement up to 2-1/2" (1-1/4" up and 1-1/4" down).
  • Allows for standoff from the primary frame.
  • Proprietary Deflection Screws (included) provide frictionless slip connection.
  • U.S. Patent No. 6,688,069

 

Alternative products:

Installation

Connections to the building can be made with screws, powder-actuated fasteners, drill-in concrete anchors or welding. Mechanical fasteners shall be equally spaced along the scored line of the 2" flange. The strut must engage the building structure a minimum of 4". When using tabulated allowable loads, connections to the building structure must be made according to the table notes. Three FastClip™ Deflection screws are used to attach the strut to the cold-formed steel framing. Screws shall be driven through the slotted holes and positioned to allow for the appropriate building deflection.

Proprietary Deflection Screws

Many of the ClarkDietrich deflection clips include our Proprietary Deflection Screws that has been specifically designed to provide friction-free deflection. These fasteners eliminate drag, binding or resistance that can often occur with common fasteners.

 

Code Approvals & Performance Standards

  • ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • ASTM A1003 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • SDS For ASTM A1003 Steel Framing Products For Interior Framing, Exterior Framing and Clips/Accessories

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product code Description
FS12 Fast Strut™
FS15
FS18
FS20
FS22
FS24

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.