Used in head-of-wall deflection conditions for interior, non-load bearing walls
YurClips are used in head-of-wall deflection conditions to provide for vertical movement.
These clips are used in combination with deep leg deflection track. Saving labor time, they do not require screws in the stud or bridging installed continuously throughout the upper most punchouts. YurClips can be installed on the deflection track or on the stud first.
- No fasteners required to structure or wall studs
- Adjustable for layout errors or changes
- Wall studs work in clip either way
- U.S. Patent No. 8,590,257 B2
Alternative products:
Product Data & Ordering Information
| Product code | Stud Size | Clip Size (in) | Pcs./Ctn. |
|---|---|---|---|
| YDC2.5 | 2-1/2" | 1-1/4" x 2-1/2" x 1" | 100 |
| YDC3.625 | 3-5/8" | 1-1/4" x 3-5/8" x 1" | 100 |
Material: 0.035" Nom. Thickness Annealed Spring Steel with clear zinc electroplate - AISI 1070
Installation
- Installed by pressing in place or tapped with a hammer
- No fasteners required to deck or floor
- Two windows for layout marks
- Adjustable for layout errors or changes
- Can be installed on track or on stud then slid onto track with pry bar
- No screws or drills required
- Perfect for situations where screws cannot be installed
- Inspectors no longer have to check screws are removed from deflection track when used
- Studs work in clip either way
Catalog Page
ASTM & Code Standards
- Material: 0.035" Nom. Thickness Spring Steel Annealed - ASTM C1070
PRoduct submittal SHeets
Click the below Product Code to view Submittal/Tech Datasheet.
| Product Code | Description |
|---|---|
| YDC2.5 | YurClip |
| YDC3.625 |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.