SwiftClip™ 300 x 300 LA-Series Support Clip

SwiftClip™ 3" x 3" (LA-Series)

Pre-punched SwiftClips™ are used for multiple construction applications. 3" leg x 3" leg clips are commonly used for floor joist hangers and truss connections.

Description

Pre-punched SwiftClips™ are used for multiple construction applications. 3" leg x 3" leg clips are commonly used for floor joist hangers and truss connections. Fixed clips should not be used in place of a deflection clip.

 

Alternative Products:

Technical Data
Installation

INSTALLATION

  • SwiftClip Support Clips are attached to the cold-formed steel (CFS) framing members using #10 minimum self-drilling screws driven through the clip holes into the steel framing. Connections to the building frame can be made with powder-actuated fasteners, drill-in concrete anchors or welding.
  • It is the responsibility of the design engineer to detail the attachment of clips and verify their capacity meets the application.
  • Place the first two screws in each leg in the outermost screw holes. Place the next two screws (if needed) in center holes next to the CRC holes (diagonal). The next screws (if needed) are placed moving from the outermost holes toward the center, symmetrically.
Resources

ASTM & Code Standards:

  • Sheet steel meets or exceeds requirements of ASTM A1003
  • Galvanized coating meets or exceeds requirements of ASTM A653
Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product code Mils/Gauge Length Description
LA543 54mils / 16GA 3-1/4" SwiftClip™ 3" x 3" LA-Series Support Clip
LA683 68mils /14GA
LA973 97mils / 12GA
LA545 54mils / 16GA 5-1/2"
LA685 68mils /14GA
LA975 97mils / 12GA
LA547 54mils / 16GA 7-1/4"
LA687 68mils /14GA
LA977 97mils / 12GA

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System