EasyClip™ X-Series™ Clip Angles

Used to secure U-channel to wall studs for lateral bridging

EasyClip™ X-Series™ Clip Angles have extra long legs (2" x 2") and are used to secure U-channel to wall studs for lateral bridging.

Description

EasyClip™ X-Series™ Clip Angles are used to secure U-channel to wall studs for lateral bridging. U-Channel is passed through the stud knockout and an EasyClip™ X-Series™ clip is screw attached or welded to provide a rigid connection. X-Series™ clip angles and U-channel should not be used in lateral bridging when stud width exceeds 8". EasyClip™ X-Series™ clip angles are also used to secure one framing member to another or to attach and reinforce headers and sills in door and window openings. X-Series™ clips are prepunched for faster and more accurate fastener placement.

  • 2" x 2" legs.
  • Available in 3-3/8", 5-3/4", 7-3/4" and 9-3/4" lengths.
  • Prepunched for faster and more accurate fastener placement.

Alternative Products:

Technical Data
Installation

Installation

EasyClip™ X-Series™ Clip Angles are attached to cold-formed steel (CFS) framing members using #10 minimum selfdrilling screws driven through the clip holes into the steel framing. Four pilot clip holes are provided and should be filled when this clip is used in a bridging application. When this clip is used in other support or connection applications, refer to the allowable capacity chart to determine the appropriate number of fasteners required. As a general rule, fasteners should be evenly spaced (see figure 1). Clips can also be welded to the CFS framing. Connections to the building frame can be made with powder-actuated fasteners, drill-in concrete anchors or welding. When using the tabular values for a welded clip,  provide a full weld to the structure, top to bottom, alongthe outside of the clip. A 3/4" minimum weld to the outside edge of the 2" leg is also recommended to control warping or to hold the clip in place before final welding. When installing powder-actuated fasteners, they must be placed 1/2" minimum away from the prepunched holes.

Resources

ASTM & Code Standards:

  • Sheet steel meets or exceeds requirements of ASTM A1003
  • Galvanized coating meets or exceeds requirements of ASTM A653
Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet

Product Code Gauge Description
X543 16 2 x 2 x 3-3/8 EasyClip™ X-Series™ Clip Angles
X545 16 2 x 2 x 5-3/4
X547 16 2 x 2 x 7-3/4
X549 16 2 x 2 x 9-3/4
X683 14 2 x 2 x 3-3/8
X685 14 2 x 2 x 5-3/4
X687 14 2 x 2 x 7-3/4
X689 14 2 x 2 x 9-3/4
X973 12 2 x 2 x 3-3/8
X975 12 2 x 2 x 5-3/4
X977 12 2 x 2 x 7-3/4
X979 12 2 x 2 x 9-3/4

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System