Search

Medium Straps (CDLMS Series)

CDLMS
CDLMS - Dims

Medium STRAPS

Manufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.

Application(s): Angles and Straps

Manufactured to resist tension load when attached to solid sawn or structural composite lumber metal plate connected trusses, framing members and wall members.

CDLMS Medium Straps are 1-1/4" wide and available in lengths from 9-5/8" to 36-5/8". Three holes are located at 3/4" on center, in a diagonal pattern, at each end of the strap. Remaining holes are punched at 1-1/2" on center, in a diagonal pattern. At mid length of each strap is a 3" long section with no holes.

Material: 18ga (43mil), 0.0451" Design thickness, 0.0428" Minimum thickness
Coating: G90 (Z275) hot-dipped galvanized coating (G185 available except CDLMS33)
Yield Strength: Structural Grade 50 Type H (ST50H), 50ksi (340 MPa)

 

  Strap Dimensions (in)
Product Code W L
CDLMS9 1-1/4 9-5/8
CDLMS12 1-1/4 12-5/8
CDLMS15 1-1/4 15-5/8
CDLMS18 1-1/4 18-5/8
CDLMS21 1-1/4 21-5/8
CDLMS24 1-1/4 24-5/8
CDLMS30 1-1/4 30-5/8
CDLMS33 1-1/4 33-5/8
CDLMS36 1-1/4 36-5/8

 

load table

 

Documents

Code Approvals & Performance Standards

  • ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
  • ASTM A1003 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
  • IAPMO ER-0176 Evaluation Report for Wood Framing Hangers and Anchors
  • SDS For ASTM A1003 Steel Framing Products For Interior Framing, Exterior Framing and Clips/Accessories

Product submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

Product code Description
CDLMS Medium Straps (CDLMS Series)