



Non-Structural (Drywall) Corner Angle
Utility angles used to connect, reinforce or secure metal stud framing in various drywall applications.
- Available in numerous sizes and gauges
- Custom sizes, bends and lengths available
Corner angle is a multipurpose 90˚ or 120˚/135˚ galvanized angle used in dozens of framing applications. Some of the most common applications include lapped framing conditions, soffit framing, floor and ceiling runner, chase wall construction and laminated gypsum drywall partitions.
- Contact ClarkDietrich Technical Services at 888-437-3244 for help with creating product submittals for custom angle sizes.
Product Data & Ordering Information:
Non-structural material
Material: Grade 33ksi min. yield strength
18mils (25ga), 0.0188" Design Thickness, 0.0179" Min. Thickness
30mils (20ga DW), 0.0312" Design Thickness, 0.0296" Min. Thickness
Coating: G40EQ (G40 or G60 available)
Code Approvals & Performance Standards:
Calculated properties are based on:
- AISI S220-15 North American Standard for CFS Framing - Nonstructural Members
- Section A4 - Material - Chemical & mechanical requirements (Referencing ASTM A1003/A1003M)
- Section A5 - Corrosion Protection (Referencing ASTM A653/A653M)
- Section C - Installation - (Referencing ASTM C754)
PRoduct submittal SHeets
Click the below Product Code to view Submittal/Tech Datasheet.
Product Code | Description |
---|---|
100x100 L-Angle | 1" x 1" L-Angle |
125x125 L-Angle | 1-1/4" x 1-1/4" L-Angle |
150x150 L-Angle | 1-1/2" x 1-1/2" L-Angle |
200x200 L-Angle | 2" x 2" L-Angle |
200x400 L-Angle |
2" x 4" L-Angle |
250x250 L-Angle | 2-1/2" x 2-1/2" L-Angle |
300x300 L-Angle | 3" x 3" L-Angle |
400x400 L-Angle | 4" x 4" L-Angle |
500x500 L-Angle | 5" x 5" L-Angle |
600x600 L-Angle | 6" x 6" L-Angle |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.