head-of-wall deflection conditions for interior, non-load bearing walls

YurClips are used in head-of-wall deflection conditions to provide for vertical movement. These clips are used in combination with deep leg deflection track. Saving labor time, they do not require screws in the stud or bridging installed continuously throughout the upper most punchouts. YurClips can be installed on the deflection track or on the stud first.

  • No fasteners required to structure or wall studs
  • Adjustable for layout errors or changes
  • Wall studs work in clip either way
  • U.S. Patent No. 8,590,257 B2

Product Data & Ordering Information

Click the below Product Code to view Tech Datasheet

Product code Stud Size Clip Size (in) Packaging Pcs./Carton
YDC2.5 2-1/2" 1-1/4" x 2-1/2" x 1" 100
YDC3.625 3-5/8" 1-1/4" x 3-5/8" x 1" 100

Material: 0.035" Nom. Thickness  Annealed Spring Steel with clear zinc electroplate - ASTM C1070

More about ClarkDietrich YurClip on ClarkDietrich TV


  • Installed by pressing in place or tapped with a hammer
  • No fasteners required to deck or floor
  • Two windows for layout marks
  • Adjustable for layout errors or changes
  • Can be installed on track or on stud then slid onto track with pry bar
  • No screws or drills required
  • Perfect for situations where screws cannot be installed
  • Inspectors no longer have to check screws are removed from deflection track when used
  • Studs work in clip either way

Alternative products