BlazeFrame® Perimeter L-Bead

VINYL L-Bead with Compressible Foam

Creates an easy attachment that is attained with staples through the bead flange.

Description

BlazeFrame® Perimeter L-Bead creates an easy attachment that is attained with staples through the bead flange. Multiple perforations along the 1-1/8" flange enhance strong compound adhesion and the raised shoulder provides for a flush finish. Rigid vinyl is rust proof, dent resistant and easy to field cut without distorting profile or leaving sharp edges and burrs.

Composite Firestop/Framing for use in fire-resistant joint systems in or between fire-resistance-rated walls and floor/ceiling or roof/ceiling assemblies. Many assemblies can also be used in smoke barriers with tested air leakage (L ratings) well below the code defined maximum of 5 cfm per linear foot.

When used in conjunction with BlazeFrame Fire Stop Deflection Track Systems, BlazeFrame Perimeter L-Bead is UL 2079-fifth edition compliant. Provides joint protection for up to 1" with UL 2079 Class II or III Movement Capabilities at 80% compression.

Installation

Installation

  • Cut to length with a fine-toothed hacksaw or chop saw
  • Make sure to cut ends square
  • Compress the foam and slide the horizontal leg over the top edge of the gypsum board
  • Ensure the horizontal flange and vertical flange are in contact with the gypsum board.
  • Attach perforated vertical flange to the gypsum base with Bostich 9/16" type G staples, or equivalent, spaced 12" on center maximum
  • Repeat steps #1 and #2 and then butt together and align to provide a neat tight fit, with no gaps between the vinyl or foam.
  • Repeat until all joints have been filled with the BlazeFrame Perimeter L-Bead
  • Apply joint compound to perforated leg (optional)
  • May be painted with high grade latex or acrylic paint (optional)
Resources

ASTM & Code standards

  • ASTM C1047 - Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
  • ASTM D3678 Class 2 materials
  • Installation: ASTM C840 & C841 (Interior Finishes)
  • SFO compressible semi-closed foam per ASTM D1056-7
  • UL 2079 - Fifth Edition compliant (When used in conjunction with BlazeFrame Firestop Deflection Track Systems)
  • IBC requires that fire-resistant joint systems be tested in accordance with the requirements of either ASTM E1966 or UL 2079.
  • SDS & Product Certification Information is available at www.clarkdietrich.com/SupportDocs
  • Please refer to UL Listings for additional details.
Submittals

PRoduct submittal SHeets

Click the below Product Code to view Submittal/Tech Datasheet.

PN# Description
62562 BlazeFrame® Perimeter L-Bead
62564 BlazeFrame® Perimeter L-Bead with Rip Bead®

ClarkDietrich SubmittalPro®

Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.