Download BIM Wall Creator

ClarkDietrich BIM Wall Creator v1.0

Wall Type Creator add-on tool for Revit® 2012 & 2011

ClarkDietrich's BIM Wall Creator was developed for Architects and Contractors to run inside Revit Architecture or Revit Structural 2012 & 2011. Now ClarkDietrich's steel framing products can quickly be imported into your designs – along with richer data to enhance project coordination and collaboration.

Installing Wall Creator
Fill out the BIM Request form below to retain your Revit add-on installation file. (This file can be download to your Desktop and removed after the install)

Once the file is downloaded:

1. Close Revit
2. Double Click on the downloaded file to install

Using ClarkDietrich's BIM Wall Creator
After the files are installed:

1. Open Revit in your project or in a new project
2. Click on Add-Ins in the Revit Menu Bar (See image below)
3. Click on ClarkDietrich / ClarkDietrich Wall Type Creator
   
4. Once Wall Creator opens you will have the option to search and create wall types by:
   - Build for Height
   - Build for STC
   - Build for UL / Fire Rating
5. After selecting the wall system you would like to create select: (Build Wall Type)
6. This will build the selected wall type in a new template file. (Not affecting your current project file)

• Contact us if you have any questions or have any feedback on the ClarkDietrich's BIM Wall Creator system at BIMinfo@clarkdietrich.com.

BIM Wall Creator Download Request: