ProSTUD®
Drywall Framing System
Vinyl 093 Control Joint
Used to relieve expansion and contraction stresses
Vinyl 093 Control Joint is applied between abutting gypsum panels and is used to relieve stresses of expansion and contraction of drywall in large ceiling and wall expanses over 30'. Control joints are installed from door header to ceiling, from floor to ceiling in long partition runs and from wall to wall in large ceiling areas.
Plastic tape protects 1/4" opening x 7/16" deep reveal and is removed after compound is applied and finished. Where sound transmission is a consideration, an approved seal must be provided behind control joint. Use metal control joints wherever fire ratings are a concern.
- Use with drywall or veneer plaster.
- Moisture resistant and rust proof.
- Maintains profile after cutting.
- Perforations enhance compound adhesion.
Product Data & Ordering Information
| Width | Length | Wt./Ctn. | Pcs./Ctn. |
|---|---|---|---|
| 3/32" | 10' | 42 lbs. | 60 |
For additional vinyl profile sizes visit Vinyl Corp™ Corner Bead web page.
- Contact ClarkDietrich Technical Services at 888-437-3244 or visit Vinyl Corp™ web site for any questions on ClarkDietrich's vinyl products.