SwiftClip™ 3" x 3" (LA-Series)
Pre-punched SwiftClips™ are used for multiple construction applications. 3" leg x 3" leg clips are commonly used for floor joist hangers and truss connections.
Pre-punched SwiftClips™ are used for multiple construction applications. 3" leg x 3" leg clips are commonly used for floor joist hangers and truss connections. Fixed clips should not be used in place of a deflection clip.
Alternative Products:
Product Data & Ordering Information
| Product code | Gauge | Mils | Design thickness (in) |
Size (in) | Common application | Pcs/Bucket |
|---|---|---|---|---|---|---|
| LA543 | 16 | 54 | 0.0566 | 3 x 3 x 3-1/4 | Joists/Trusses | 100 |
| LA683 | 14 | 68 | 0.0713 | Joists/Trusses | 100 | |
| LA973 | 12 | 97 | 0.1017 | Joists/Trusses | 50 | |
| LA545 | 16 | 54 | 0.0566 | 3 x 3 x 5-1/2 | Joists/Trusses | 100 |
| LA685 | 14 | 68 | 0.0713 | Joists/Trusses | 50 | |
| LA975 | 12 | 97 | 0.1017 | Joists/Trusses | 50 | |
| LA547 | 16 | 54 | 0.0566 | 3 x 3 x 7-1/4 | Joists/Trusses | 50 |
| LA687 | 14 | 68 | 0.0713 | Joists/Trusses | 50 | |
| LA977 | 12 | 97 | 0.1017 | Joists/Trusses | 50 |
Material Structural Grade 50 Type H (ST50H), 50ksi
Coating G90 (Z275) hot-dipped galvanized coating
See submittals for product weights
Load Tables
INSTALLATION
- SwiftClip Support Clips are attached to the cold-formed steel (CFS) framing members using #10 minimum self-drilling screws driven through the clip holes into the steel framing. Connections to the building frame can be made with powder-actuated fasteners, drill-in concrete anchors or welding.
- It is the responsibility of the design engineer to detail the attachment of clips and verify their capacity meets the application.
- Place the first two screws in each leg in the outermost screw holes. Place the next two screws (if needed) in center holes next to the CRC holes (diagonal). The next screws (if needed) are placed moving from the outermost holes toward the center, symmetrically.
Code Approvals & Performance Standards
- ASTM A653 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- ASTM A1003 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- SDS For ASTM A1003 Steel Framing Products For Interior Framing, Exterior Framing and Clips/Accessories
PRoduct submittal SHeets
Click the below Product Code to view Submittal/Tech Datasheet.
| Product code | Mils/Gauge | Length | Description |
|---|---|---|---|
| LA543 | 54mils / 16GA | 3-1/4" | SwiftClip™ 3" x 3" LA-Series Support Clip |
| LA683 | 68mils /14GA | ||
| LA973 | 97mils / 12GA | ||
| LA545 | 54mils / 16GA | 5-1/2" | |
| LA685 | 68mils /14GA | ||
| LA975 | 97mils / 12GA | ||
| LA547 | 54mils / 16GA | 7-1/4" | |
| LA687 | 68mils /14GA | ||
| LA977 | 97mils / 12GA |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.