Used in conjunction with joint compound when a clean, finished edge is required
U-Trim, or Spackle J is used to provide maximum protection and clean finished edges on gypsum panels around door and window openings and when wallboard abuts dissimilar surfaces, such as suspended ceilings, beams, plaster, masonry and concrete.
U-Trim is easily installed by sliding trim over the edge of the board and nailing or screwing through the knurled (long) flange. Installation is completed with application of joint compound for a smooth ready-to-paint surface.
- Rugged steel construction
- Galvanized for corrosion protection
- Knurled, perforated flange enhances compound adhesion
Material: 0.012 min thickness, G30 galvanized
Product Data & Ordering Information
Product code | Width | Length | Pcs./Ctn. |
---|---|---|---|
M20A | 1/2" | 8' | 50 |
1/2" | 10' | 50 | |
5/8" | 8' | 50 | |
5/8" | 10' | 50 |
Code Approvals & Performance Standards
- ASTM C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- SDS For ASTM A653 Steel Finishing Products For Interior Finishing and Exterior Finishing
Storage:
All stored materials shall be kept dry. Materials shall be stacked off the ground, supported on a level platform, and protected from the weather.
PRoduct submittal SHeets
Click the below Product Code to view Submittal/Tech Datasheet.
Product Code | Description |
---|---|
M20A | Metal U-Trim #200-A |
ClarkDietrich SubmittalPro®
Submittal sheets for the exact product you're looking for can be created by using ClarkDietrich's SubmittalPro® Product Submittal System.
- Contact ClarkDietrich Technical Services at 888-437-3244 for any questions about creating product submittals or using SubmittalPro.