SLP-TRK® Slotted Deflection Track

Most cost-effective, positively attached fire-rated deflection system

It’s a real challenge these days meeting head-of-wall codes for fire stop and life safety issues while maintaining the ability to absorb vertical movement in low-, mid- and highrise buildings. Brady's SLP-TRK* slotted track is the solution.

Brady's SLP-TRK® slotted track provides a positive attachment for overall strength and allows for vertical movement caused by normal head-of-wall and floor extension or compression. SLP-TRK® slotted track smoothly integrates with a variety of wall installation systems and is extremely user-friendly as well as economical. The simple design and easy installation reduces the cost of materials and labor. And the installer can use the head-of-wall systems he prefers to work with.

SLP-TRK® slotted track systems comply with the toughest code requirements in North America, if not the world. It has been tested with a variety of leading fire-stop products and has outperformed the requirements of stringent fire and hose stream testing of ASTM E 119 and ASTM E 814. SLP-TRK has also met and exceeded the latest seismic cycling standards found in UL2079 and ASTM E 1966.

Need Product Data Sheets or Submittals?

For product data sheets with allowable lateral loads for all SLP-TRK profiles, use the Launch SubmittalPro link found on the bottom of this page or view the below submittals:

SLP-TRK Structural Slotted Deflection Track Submittal

SLP-TRK Non-Structural Slotted Deflection Track Submittal

The SLP-TRK® slotted track has achieved the following building code approvals:

• UL Classified R19236
• UL Certified for Canada XHL17
• LA City RR25344
• OSHPD R#0371
• NY City MEA 285-01-M

SLP-TRK® slotted track is installed directly to the slab or corrugated metal roof deck using #10 sheet metal screws, Tapcon** concrete screws or power-driven fasteners. Fasteners must be placed at 8" or 12" intervals depending on the flute intervals of the metal decking material. Studs must be cut 3/4" shorter than floor-to-ceiling height to allow for ceiling deflection. Studs are attached to the track through the midpoint of flange slots using #8 self-tapping wafer-head screws on each side of the stud.

U.S. Patent # RE 39,462

• Positive attachment that allows up to 1” of vertical movement.
• UL*** approved 1- and 2-hour systems.
• Meets IBC, BOCA, SBCCI, ASTM, UL2079, and UBC building codes and standards.
• Single track assembly.

*SLP-TRK is a registered trademark of SlipTrack Systems, Inc.
**Tapcon is a registered trademark of Illinois Tool Works Inc.
***UL and UL Classified are trademarks of Underwriters Laboratories, Inc.

Visit: www.sliptrack.com
or Call 1-88-475-7875 for more information on this Brady Brand System.

Building a better Way.